An introduction to the methods of improving the performance of Mould? An introduction to the methods of improving the performance of Mould. The matrix is required to have high enough st...

Selection of cutting fluid in metal cutting process? 1.Rough turning machining The machining allowance of rough turning is large , so the cutting depth and feed rate are large , cutting...

Leakage defects of die castings and Prevention measures? Feature : leakage and blow will happen to die casting after testedReason：1. Insufficient pressure2. Th...

Common faults of Servo system in CNC Machining Center? 1、Large current leads to machine tool alarm. Generally, there are two kinds of possibility, that is, the damage of power drive elem...

Introduction of Influencing Factors on Mould Life of Aluminum Die Casting? There are many factors to influence mould life of Aluminum Die Casting which involves many specific aspects. Fo...

The Process of Mould Design？ 1. Design data → 2.Machining plan confirmation → 3.Rectangular machining for six faces → 4.CNC rough machining→ 5.Heat treatment → 6.CNC finish mach...

What is one-stop solution service of Yitai? Molds making are designed by our mold department . Products are proceeded on CNC machines. CNC machining processing must be strictly checked a...

What is the designcore of die casting structure? Die casting functional structure design is the core of die casting structure design, which determines the necessary size, wall thickness ...

The performance characteristics of al-si, al-mg and al-zn are commonly used？ Die casting alloy is one of the elements of die casting production. For producing excellent die casting parts...

The advantages and disadvantages of Electroplating? The electroplating is to use the product dipped into the electrolyte, conduct electricity, and form a thin layer of electroplating on ...

What is the advantages and disadvantages of anodising？ Anodising process is widely used in aluminum extrusion products, not applicable to other metals expect aluminum alloy. The process ...

The advantages and disadvantages of sandblasting？ Advantages:1. Environmental protection, because the coating don’t need to be painted, the sand can be recycled, and it has little harm t...

Advantages and Disadvantages of Painting ？ Advantages: 1. Thin covering thickness and light weight layer. 2. Multiple color good luster. 3. High flatness. 4. Good concealer....

What is Polishing Surface Treatment ? Polishing is to use abrasive belt, nylon wheel, cloth roller and other polishing products for surface treatment finishing, and it can achieve mirror...

What is vibrating polish? Vibrating polish is through the shock tank, using the abrasive materials to make the product surface friction, such as stones, steel balls, nut shell, etc. so t...

Can die-cast aluminum be anodized? It can be done, but any methods to do so are likely to be ad-hoc, involving both surface treatment and/or anodizing process optimization...

What should be paid attention to testing equipment installation？ 1. Do not despise the grounding problem and install the correct ground line according to the requirement For grounding...

Five key points of die casting processing 1.1 Pressure Pressure is the basic characteristic of die casting processing, and the filling flow and compaction of metal liquid are all accomp...

How do you decide the way of flow for aluminium die casting? Depending on the size of the item cast in the mould, depending on the way ...

How do you decide the way of flow for aluminium die casting? Depending on the size of the item cast in the mould, depending on the way ...

Plastic Injection Molding and aluminum die casting are similar in a lot of ways: * Both require a mold or tool to produce parts.* The tooling cost is very similar in both industries.* Both processes inject material into a mold to make parts.* Both processes can make hundreds or thou...

A: To SAVE your time and expedite your request for a quote, please include:a. Component application or functionb. Alloy/Materialsc. Annual production quantityd. Approximate size or weight of parte. Send us your drawing if possiblef. Approximate life of programg. Destination h. 3D CAD and 2D files

A: Yitai offers zinc, aluminum, and magnesium die cast alloys.

A: Yes, we can help you with your prototyping needs if it leads to high volume production.

A: Yes, Yitai does guarantee the life of our dies depending on the material used. For specific information on our guarantees, please contact our engineering team.

A: Yitai multi-slide tools are only available for hot chamber die casting alloys.

A: The minimum or maximum cross-sectional wall thickness on any part is very much dependent on the overall part size and design.

A: No, porosity is inherent to the die casting process. However, with proper tool design, porosity can be minimized and localized in noncritical areas.

A: Almost all of the surface finishes that we have are appropriate for aluminum die casting, including all plating, painting, e-coating, and anodizing.